Core materials can be used in GRP structures to increase stiffness for load bearing purposes, reducing weight, cost and laminating time. Multiple blocks of foam can easily be bonded together to create very large patterns (full vehicle bodies, for example).Īs well as use as a pattern making foam block this High Density Polyurethane Foam Block is also intended for use (and approved for use) as a structural core material. Please choose the block size you require from the drop-down list. Our High Density Polyurethane Foam Block is available in block sizes of: 600圆00mm, 600x1200mm and 1200x1200mm. Can be finished to a high standard with a range of surface coats.Compatible with epoxy, polyester and vinylester resin systems.Dimensionally stable (will not expand or contract).High density results in sturdy, durable patterns (which can be walked on).Can be cut and shaped by hand or machined.Perfect for large patterns and fast hand working: Also available is our Low Density Polyurethane Foam Block with a nominal density of just 48kg/m³. Our High Density Polyurethane Foam Block has a nominal density of 96kg/m³. You will need a PDF reader to view these links, you can download Acrobat Reader for free from Adobe’s website.High density PU foam block ideal for making sturdy patterns with precise surface detail and a high quality surface finish. For additional information refer to the Sculpwood Epoxy Paste Safety Data Sheet. Check the shipping options page for details on shipping hazardous items. Sculpwood Epoxy Paste is a hazardous product. IMPROPER MIXING IS THE GREATEST CAUSE OF EPOXY SYSTEMS FAILURE. Tan (Part A) White (Part B) / Beige (Mixed)Ĥ Hours (By hand or block) / 7 Hours (Machine sand) Technical Data / Properties Viscosity 77☏ (25☌) cps If you wish to mix by weight the ratio is one part A to one part B. If the Sculpwood Putty is going to be color-toned with our Epoxy Coloring Agent, the toning colorant can be added in small amounts after the Sculpwood Putty is mixed. There is a ☑0% mix-error margin so volume amounts can usually be judged by eye. Equal amounts by volume are put on the board surface, and then folded and kneaded until a consistent color is obtained. Professionals to the do-it-yourselfers select PC-7 because. SculpWood Putty is most easily mixed by hand, using disposable gloves. This paste epoxy was originally formulated more than 60 years ago for the maximum in bonding power. NOTES: For best results, apply at 50☏ (5☌) or above. Measure and mix only enough SculpWood that can be applied in the indicated working time. Let the S-1 Sealer cure before applying the SculpWood Putty. In most cases, applying S-1 Epoxy Sealer as a primer is recommended. If necessary, sand surface with 80–120 grit paper. APPLICATION:Įnsure surfaces to be repaired are clean, free, of dust, grease, or dirt. Separation does not harm the quality of the product. If separation occurs, simply remix ingredients, and use as normal. C.), or for longer periods, please check for separation of the resin from the additives. Storage of this product in higher temperatures, or for longer than 3 years, can lead to ingredient separation. SculpWood Moldable Epoxy Putty is available in 8 oz, 2 Pint, 2 Quart and 2 Gallon units. Resin and hardener are easily mixed by hand.Features a convenient 1:1 mixing ratio.Will not shrink or become brittle after curing.Use to replace rotted or chipped away wood cracks and other defects in window and door sills, frames, railings, furniture, etc. It is easily sanded and will accept paint, screws and nails. It has excellent adhesion to wood, stone, metal, and most plastics with the exception of plastics in the polyethylene family. It is moldable, carvable, lightweight, strong, and exhibits excellent adhesion to a variety of substrates. SculpWood Putty is a two-component, solvent-free, kneadable epoxy.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |